Milwaukee 6066 Spezifikationen PDF herunterladen (Seite 1)

Milwaukee Tool

Heavy Duty Sanders/Grinders

Model Nos. (Sanders): 6065, 6066, 6095, 6096

(Grinders): 6067, 6068, 6069, 6070, 6098

Safety Instructions

GENERAL SAFETY RULES

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flam-

mable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions

can cause you to lose control. Protect others in the work area from debris such as chips and

sparks. Provide barriers or shields as needed.

4. Grounded tools must be plugged into an outlet properly installed and grounded in

accordance with all codes and ordinances. Never remove the grounding prong or modify

the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if

you are in doubt as to whether the outlet is properly grounded. If the tools should electri-

cally malfunction or break down, grounding provides a low resistance path to carry electricity

away from the user.

5. Double Insulated tools are equipped with a polarized plug (one blade is wider than the

other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any way. Double insulation eliminates the

need for the three wire grounded power cord and grounded power supply system.

6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrig-

Page 1

RenTrain INC

WARNING!

WORK AREA

ELECTRICAL SAFETY

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire and/or personal injury.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - RenTrain INC

Milwaukee ToolHeavy Duty Sanders/GrindersModel Nos. (Sanders): 6065, 6066, 6095, 6096(Grinders): 6067, 6068, 6069, 6070, 6098Safety InstructionsGENER

Seite 2

erators. There is an increased risk of electric shock if your body is grounded.7. Don't expose power tools to rain or wet conditions. Water enter

Seite 3

with the switch is dangerous and must be repaired.19. Disconnect the plug from the power source before making any adjustments, changingaccessories, or

Seite 4

harm. Some examples of these chemcals are:w lead from lead-based paintw crystalline silica from bricks and cement and other masonry productsw aresenic

Seite 5

Tools: Tools with Three-Prong PlugsTools marked "Grounding Required" have a three wire cord and threeprong grounding plug. The plug must be

Seite 6 - Extension Cord Length

Grounded tools require a three wire extension cord. Double insulated tools can use either a twoor three wire extension cord. As the distance from the

Seite 7

Wheel Instructions1. Use the proper type grinding wheel for the job. Specific types of wheels are meant for spe-cific grinding applications. Explanati

Seite 8

always used properly. Defective or missing parts may damage the wheels and other accessories.Always use mounting flanges supplied with the tool.5. Usi