Milwaukee worklight Bedienungsanleitung PDF herunterladen (Seite 2)

• Read and understand all the instructions before

using the appliance.

• To reduce the risk of injury, close supervision is

necessary when an appliance is used near children.

• Warning - The lens gets very hot during use. To

reduce the risk of burns, do not touch hot lens.

• Never insert bulbs other than MILWAUKEE

bulbs in the bulb socket. Bulbs other than

MILWAUKEE bulbs may cause short circuit of

battery and personal injury.

• Store idle work light out of reach of children.

Warm work lights can become hazardous in the

hands of children.

• Do not use outdoors.

• For a rechargeable appliance - Use only the char-

ger supplied by the manufacturer to recharge.

• For an appliance with a replaceable lamp - always

unplug or remove battery pack before replacing the

lamp. See "Speciﬁ cations" for replacement bulbs.

• Know your work light. Read this manual carefully

to learn your work light's applications and limitations

IMPORTANT SAFETY INSTRUCTIONS

as well as potential hazards associated with this

type of tool.

• Batteries must be recharged only with the char-

ger speciﬁ ed by the manufacturer. A charger that

may be suitable for one type of battery may create

a risk of ﬁ re when used with another battery.

• Use work light only with speciﬁ cally designated

battery pack. Use of any other batteries may create

a risk of ﬁ re.

• When battery pack is not in use, keep it away

from metal objects like: paper clips, coins, keys,

nails, screws, or other small metal objects that

can make a connection from one terminal to

another. Shorting the battery terminals together may

cause sparks, burns, or a ﬁ re.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

Before using the work light, read this operator's manual, your battery pack and charger operator's manual,

and all labels on the battery pack, charger and work light.

SAVE THESE

INSTRUCTIONS

SPECIFICATIONS

WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. When using

electric appliances, basic precautions should always be followed, including the following:

SYMBOLOGY

FUNCTIONAL DESCRIPTION

1. Bezel

assembly

2. On/Off

button

3. Magnet

4. Hook

5. Pivot head

Cat. No. Volts DC Replacement Bulbs For use with Battery Packs:

49-24-0185 28 49-81-0040 48-11-2830 28 V Li-Ion or equivalent

49-24-0187 28 n/a * 48-11-2830 28 V Li-Ion or equivalent

49-24-0171 18 49-81-0030 Use only MILWAUKEE M18™ Li-Ion battery packs.

2735-20 18 n/a * Use only MILWAUKEE M18™ Li-Ion battery packs.

49-24-0145 12 49-81-0020 Use only MILWAUKEE M12™ Li-Ion battery packs.

49-24-0146 12 n/a * Use only MILWAUKEE M12™ Li-Ion battery packs.

ASSEMBLY

Inserting/Removing Battery Pack

Insert the battery pack by sliding battery pack into

the body of the tool. Insert the battery pack until

the battery latches lock.

To remove the battery pack, press in both battery

latches and slide the battery pack off of the tool.

Adjusting the Pivot Head

Cat. No. 49-24-0145 and 49-24-0146 - The pivot

head can pivot to a range of 90°; with detents every

15°. Pivot head to desired position. Allow the detent

to snap into place. Do not forcibly pivot the head.

Cat. No. 49-24-0171, 2735-20, 49-24-0187, and

49-24-0185 - The pivot

head can pivot to a range

of 135°; with detents

every 10°. Pivot head to

desired position. Allow

the detent to snap into

place. Do not forcibly

pivot the head.

WARNING To reduce the

risk of injury, do not look directly into the light

when the work light is on.

WARNING Recharge only

with the charger speciﬁ ed for the battery.

For speciﬁ c charging instructions, read the

operator’s manual supplied with your charger

and battery.

WARNING To reduce the

risk of injury and damage, never insert bulbs

other than the recommended MILWAUKEE

replacement bulb in the bulb socket. Other

bulbs will over heat!

WARNING To reduce the

risk of injury, DO NOT operate work light

without bezel assembly in place. Bulb does

get hot. Always remove battery pack before

changing or removing bulbs. Always allow

the work light to cool for at least 10 minutes

before replacing the bulb.

OPERATION

To turn on the work light, press the ON/OFF but-

ton. To turn off the work light, press the ON/OFF

button again.

Hook

Cat.No. 2735-20,

49-24-0185,

49-24-0187 and

49-24-0171)

To use the hang-

ing hook, press in

the hook joint. Pull

the hook out.

Replacing the Bulb (Cat. No. 49-24-0145,

49-24-0171, and 49-24-0185)

NOTE: Cat. No. 49-24-0146, 2735-20, and

49-24-0187 use an LED bulb that cannot be re-

placed. Bezel can not be removed. Attempting to

remove the bezel will damage tool.

1. Remove battery pack before changing bulb.

2. Unscrew the bezel assembly on pivot head by

turning counterclockwise.

3. Remove the bezel assembly.

4. For Cat. No. 49-24-0185

and 49-24-0171, pull

the aluminum heat sink

forward.

5. Gently rotate bulb coun-

ter clockwise and pull

out.

To install new bulb, follow

above directions in reverse.

Cleaning

Keep tool handles clean, dry and free of oil or

grease. Use only mild soap and a damp cloth to

clean the tool, battery pack and charger since cer-

tain cleaning agents and solvents are harmful to

plastics and other insulated parts. Some of these

include gasoline, turpentine, lacquer thinner, paint

thinner, chlorinated cleaning solvents, ammonia

and household detergents containing ammonia.

Never use flammable or combustible solvents

around tools.

Maintain Work Light

Keep your work light, battery pack and charger in

good repair by adopting a regular maintenance

program. If the work light does not work properly,

return the work light to a MILWAUKEE service

facility for repairs.

MAINTENANCE

WARNING To reduce the

risk of injury, always unplug the charger and

remove the battery pack from the charger

or tool before performing any maintenance.

Never disassemble the tool, battery pack or

charger. Contact a MILWAUKEE service facility

for ALL repairs.

WARNING To reduce the risk

of personal injury and damage, never immerse

your tool, battery pack or charger in liquid or

allow a liquid to ﬂ ow inside them.

ACCESSORIES

For a complete listing of accessories refer to your

MILWAUKEE Electric Tool catalog or go online

to www.milwaukeetool.com. To obtain a catalog,

contact your local distributor or a service center.

WARNING Always remove

battery pack before changing or removing

accessories. Only use accessories speciﬁ -

cally recommended for this tool. Others may

be hazardous.

Pull

out

Press

Bulb

Aluminum

heat sink

Pull

forward

Cat. No.

49-24-0185,

49-24-0171

NOTE: Use a soft cloth when installing bulbs. Direct

contact with oils or other contamination can shorten

the life of bulbs.

On Cat. No. 49-24-0171 and 49-24-0185, a spare

bulb can be stored behind the aluminum heat sink.

See “Speciﬁ cations” chart for proper replacement

bulbs. See your nearest MILWAUKEE Retailer or

Service Center to obtain replacement bulbs.

*LED worklights do not require replacement parts.

Volts

Direct Current

Underwriters Laboratories, Inc.

United States and Canada

Underwriters Laboratories, Inc.

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Milwaukee worklight Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern